Products

T100 TURBOCHARGER ™

100 AMP MPPT BATTERY CHARGE MANAGEMENT SYSTEM.

  • Wire the PV modules in series up to 200 Voc max 160 volts nominal

  • 100 Amps continuous output at up to 45oC/113oF ambient temperature

  • Built-in Battery Energy Monitor

  • Wired/Wireless Remote Displays

  • One-minute set-up with fail-safe calculated defaults

  • Patent Pending MPPT Provides Best Energy Harvest Available

  • Easy stacking of up to 16 T100’s in parallel for higher currents

  • Precision charging of 12/24/36/48V batteries using voltage sense wires


Click here for detailed specs in PDF version

 

200 Volt maximum PV open circuit voltage

The T100 is the only MPPT charge controller that works with the newer higher voltage PV modules.

Power and Control in a Single Device
The T100 TurboCharger™ integrates Maximum Power Point Tracking, battery charge management, state-of-charge information, and communications into a single device. With 100 Amps continuous output, the T100 has the largest capacity in the industry.

Energy Monitor Built In

The T100 includes a built-in Energy Monitor using TriMetric™ Technology from Bogart Engineering. The monitor tracks power production and consumption to calculate the energy remaining in the battery. State-of-Charge (SOC) is displayed in Percent Full, Amp-hours, Watt-Hours, and Bar-Graph format. In addition, 90 days of energy-harvest history is stored in the T100.

Integral Performance-and-Update Communications

The slot for optional add-in cards provides data communication to Wireless Remote Displays, PCs and the Internet. System performance can be monitored remotely and the T100 accepts software upgrades using a PC and the Remote Display SD Card.

Continuous Power Rating Up to 45oC/113?F Ambient
The T100 TurboCharger™ produces full-rated power without de-rating at up to 45oC ambient temperature. Above that temperature, the output current is reduced gradually to protect the life of the T100 and then automatically ramped up as the temperature decreases. High-efficiency power circuits and robust thermal design minimize heat generation. The internal temperature-controlled variable speed fan runs just fast enough to maintain optimum reliability.

Enhanced Battery Performance and Life

The T100 supports Flooded Lead Acid (FLA), GEL and Absorbed Glass Mat (AGM) batteries. Four-stage charging with adjustable set points for all parameters.

 

Optimum MPPT/Charging Efficiency Cuts Costs
The T100 captures up to 35% more power from the photovoltaic (PV) array with patent-pending MPPT technology. The Apollo MPPT algorithm starts early and locks onto the peak power during rapidly changing insolation and temperature. The T100 dramatically cuts the cost of a PV system by reducing the number of PV panels required, eliminating the need for heavy gauge wiring, and increasing the life of the storage batteries.